Design features

• Offers protection from damage and wear at corners from carts, beds, wheelchairs or hand held items carelessly brushed against the corners.
   
• Available in the 100 series, with 2” x 2” wings and 90 degree corners, 110 series with 3”x 3” wings and 90 degree corners and 120 series with 3” x 3” wings and 135 degree corners. Impact resisting PVC cover has an attractive textured finish that protects the corners from gouges, scratches and scuffs.
   
• Installs easily by snapping the vinyl cover over the aluminum retainer.
   
• For maximum impact resistance in the 110 and 120 series, a firmly held PVC impact is inserted in the aluminum retainer. The absorber runs the entire length of the corner, increasing strength and preventing damage to the corner.
   
• Corner guards are provided in 4 and 8 foot lengths.
   
• ABS end caps, in matching textured finish, create a consistent and finished look at either end of the corner guard.

Where used
Tepromark High Impact Corner Guards are installed at corners that would be damaged by moving objects that result in gouges, scratches and scuffs.

• Interior walls and partitions.
   
• Door Frames.
   
• Rectangular columns.
   
• Service counters.
   
• Displays, cabinets and plinths used in retail stores, hotels, etc.

System components

100-01 - Aluminum Retainer 2” x 2” x 90 degrees - Profiled aluminum extrusion over which the vinyl cover is mounted. Standard length is 8 feet Also available in four foot length.

110-01 - Aluminum Retainer 3” x 3” x 90 degrees - Profiled aluminum extrusion over which the vinyl cover is mounted. Standard length is 8 feet. Also availabe in four foot length.

120-01 - Aluminum Retainer 3” x 3” x 135 degrees -Profiled aluminum extrusion over which the vinyl cover is mounted standard length is 8 feet. Also availabe in four foot length.

100-02 - Impact absorber - extruded PVC profile
designed to mount in an aluminum retainer, standard length 4ft and 8 ft. Use only on the 110 and 120 parts.

100-03 - Vinyl cover - 2”x 2” x 90 degrees - extruded textured PVC profile designed to mount over an aluminum retainer.

110-3 - Vinyl cover 3” x 3” x 90 degrees - extruded textured PVC profile designed to mount over an aluminum retainer.

120-3 - Vinyl cover 3” x 3” x 135 degrees - extruded textured PVC profile designed to mount over an aluminum retainer

100-04 - End cap 2” x 2” x 90 degrees - molded textured ABS

110-04 - End cap 3" x 3" x 90 degrees - molded textured ABS

120-04 - End cap 3" x 3" x 135 degrees - molded textured ABS

Colors  (click to view color chart)
Available in a wide range of colors. Popular colors and profiles are available in the TEPROMARK “Quick Ship” Program. Call toll free, or by e-mail.

Installation
Each order is shipped with a complete Installation Guide that outlines step by step installation procedures and requirements. Guides are available by calling toll free or by e-mail.

Ordering Information
Any quantity will be shipped in “Quick Ship” program colors, other colors in the standard pallet for less then our fee and there will be a setup charge. Any color will be matched with an order of 2500 feet or more. There will be a surchare for orders less than 2500 feet.

Technical Data
Click here to view the technical data cover this product